• classification:News Center
• Author:
• Source:
• Time:2021-02-27
• Visits:0

The mechanical parts of hydraulic hoses are connected circuits, pumps, valves, filters, hoses, metal hoses and other suitable parts. Without this accessory, the hydraulic hose will not be able to use the pressure of the control fluid. In order to meet the specific equipment in a large number of industrial applications, the design and manufacture of hydraulic hoses are divided into three categories. They are gear motors, vane motors and piston engines. Although the general operating capabilities are the same, they each have their own characteristics. There are two types of gear motors. Their internal and external types. For the former, the output shaft and the gear set inside and outside the party are placed inside. The gear design is matched within a single housing, and the latter type. There are two main types of these two core parts that are responsible for traffic. In addition, various hydraulic hose blade motors are also popular in the market. They are the drive shafts on the slotted rotor, built like the wings of equipment. This type of design moves to the ramp or part of the tight ring transition in the radial direction. The grooves and holes are kept in the overall operation process and the overall balance of the equipment. In addition, the third main type of hydraulic hose is called a piston motor. And there are two styles for practical use. Their axial and radial piston motors. This means that the way of rotation is different. Therefore, they are divided into two applications in their respective fields. For example, radial piston pump motors are often applied to automobile and aircraft engines, as well as some large-scale equipment. These types of hydraulic hoses are working hard to improve the efficiency and accuracy of industrial development, leading a bright future for modern industry.